HeNe FiberPort and Threading Adapters

Click to Enlarge
SM05AHN Adapter Connects SM05 Lens Tube to HeNe

• Effectively Adds External SM05 (0.535"-40) Threading to HeNe Output Port
• Attaches to Lasers That Have Industry-Standard, 1" square, 4-40 or M3 Four-Bolt Patterns
• Includes Four 4-40 Cap Screws

The SM05AHN Adapter allows SM05-threaded components to be attached directly to the front of a standard cylindrical HeNe laser (mechanical drawing shown below). It contains four counterbored slots that fit industry-standard, 4-40 and M3 four-bolt patterns. This adapter is ideal for enclosing a HeNe beam path using SM05 Lens Tubes.

Click to Enlarge
Figure 406A  HCL Adapter Mounts FiberPort to HeNe Laser
Mounting Details

• Attaches to Lasers That Have Industry-Standard, 4-40 or M3 Four-Bolt Patterns
• Central Bore with C-Mount Threading
• Mounting Cap Screws with 4-40 and M3 Threading Included
• Four 2-56 Screws Included for Attaching a FiberPort

The HCL Adapter allows a FiberPort to be directly attached to the front of a standard cylindrical HeNe laser (mechanical drawing shown in Figure 406B). Equipped with a four-bolt pattern on 1" centers, the adapter comes with the necessary 4-40 and M3 cap screws for attaching it to the HeNe laser body, as well as the additional four cap screws needed to attach a FiberPort. The four-bolt pattern on the HCL accommodates both the M3-threaded Ø1.38" (Ø34.9 mm) and 4-40-threaded Ø1.47" (Ø36 mm) standards. For added mounting options, the HCL also has internal C-Mount (1.000"-32) threading, which is utilized on some lasers.

For cylindrical lasers, the 2.0 mm focal length PAF2-2A and 4.6 mm focal length PAF2-5A FiberPorts, which are compatible with the HCL, are recommended. For more information, please see the Selection Guide tab on our FiberPorts page.

Figure 406B  Standard Cylindrical HeNe Mechanical Drawing

Click to Enlarge

• External 5/8"-32 Threading is Compatible with Thorlabs' Self-Contained HeNe Lasers
• Front Counterbore has Internal SM05 (0.535"-40) Threading
• Outer Ring has External SM1 (1.035"-40) Threading

The SM1A32 Adapter allows externally SM05-threaded or internally SM1-threaded optomechanics to be attached to the output aperture of the HNLS008R(-EC) or HNLS008L(-EC) Self-Contained HeNe Lasers.

Click to Enlarge
Figure 410A  FiberPort Mounted onto a Self-Contained
HeNe Laser Using an HCL2 Adapter

• External 5/8"-32 Threading is Compatible with Thorlabs' Self-Contained HeNe Lasers
• 5/8"-32 External Threading
• Slip Plate Design for Coarse FiberPort Alignment

The HCL2 Adapter, which features external 5/8"-32 threading, allows a FiberPort coupler to be attached directly to the threaded aperture of our self-contained HeNe lasers or any other 5/8"-32 tapped hole. A slip-plate design allows the position of the FiberPort to be shifted and locked to maximize coupling efficiency. FiberPort mounting screws are included.